Mount-It! MI-802 Floating Wall Mounted Shelf Bracket Stand for AV Receiver, Component, Cable Box, Playstation4, Xbox1, VCR Player, Blue Ray DVD Player, Projector, Load Capacity 44 lbs, Two Shelves, Tinted Tempered Glass
Manufacturer: Transform Partners LLC
Mount-It! floating wall mounted double shelves allow you to get rid of your floorstanding TV furniture and complement the look of your wall mounted flat screen television. The dual shelf design allows you to place DVD players, cable boxes and other AV components on the wall. The shelving system is very durable and can carry up to 44 pounds of total weight. Made from sturdy extruded Aluminum and tempered glass. Its large surface area can easily hold gaming systems and BluRay DVD players. The installation is very easy. Simply locate the wall stud and use the provided hardware to hang the wall mounting plate on the wall. Once the wall plate is installed, place the tempered glass shelves on the wall bracket channels. Cable management holes hide the unsightly cables. Features and Specifications: Dimensions: 17.5 inch Wide, 14 inch Deep, 21 inches High. 10 inches of vertical clearance between the two shelves. Fits most DVD players, cable boxes, AV receivers and gaming consoles. 6 mm thick black tempered glass. Powder coated Aluminum Wall Plate for modern look and scratch resistance. Cable Management System. 22 lbs carrying capacity for each shelf, 44 lbs total. Warning: The installer of these products must verify that the mounting surface or wall, will safely support the combined weight of all attached equipment and hardware.
Mount Factory Articulating Tilting TV Wall Mount with HDMI Cable For 32 in. - 52 in. TVs
Manufacturer: Mount Factory
Brand: Mount Factory
This articulating, tilting TV wall mount is for LED, LCD, Plasma and other flat panel displays measuring between 22"-52" diagonally. The mount fits many sizes and supports VESA mounting standards of 100mm x 100mm, 100mm x 200mm, 200mm x 200mm. When using included extensions that are easily added with two screws each, supports 200mm x 400mm, 300mm x 300mm, and 400mm x 400mm. The easiest way to ensure fit of the mounting pattern is to find out the VESA pattern for your panel either online or by measuring between the screw holes on the rear of the TV or panel (100mm is about 4\"). Mount compresses to 1.75\" and extends up to 19.25\" from wall. Articulating arm will also allow for offset mounting, where the panel (when extended out on the arm) can be shifted horizontally up to 17.5\" left or right. Specifications: Fully rated for up to 80 pound displays; Tilts from -2 degrees (up/backward) to +10 degrees (down/forward); Swivels up to 180 degrees; RoHS, CE, and ISO-9001 certified. Complete mount package includes pre-assembled, 12-gauge powder-coated, heavy-duty steel mount, mounting extensions for use with larger TVs, installation instructions, and full hardware package with installation wrench, stud wall screws, masonry anchors, mounting screws, washers, and spacers.
The TAB-FSM car or truck seat rail or floor tablet mount can be used with all tablets 8.9 to 18.4 inches in screen size, including Apple iPad Pro, iPad Air 2 and iPad Air, iPad 4, 3, and 2, Samsung Galaxy View, Galaxy Note 10.1, Galaxy Note Pro 12.2, Galaxy Tab 4 10.1, Galaxy Tab Pro 10.1, Galaxy Tab Pro 12.2, Galaxy Tab S 10.5, Google Pixel C, Nexus 10, and Nexus 9, LG G Pad 10.1, Sony Xperia Tablet Z4 and Tablet Z. This mount includes Arkonâ€™s Slim-Grip Universal Tablet Holder and a seat rail or floor mount with 18â€ flexible aluminum gooseneck. The Slim-Grip tablet holder features a spring-loaded design that makes it easy to insert or remove the tablet by pushing down on the lower legs of the holder with one hand. Included with the holder are 10 support legs (4 short, 2 medium and 4 long versions). Choose the 4 legs that provide the best fit for your tablet. These insert at the top and bottom of the holder and can be easily adjusted in order to keep any side buttons and ports unobstructed. For most large tablets, the best mount holder configuration is to attach 2 short support legs on top and the 2 long support legs on the bottom of the holder. For smaller tablets, use all 4 short support legs on the holder. For larger tablets including iPad Pro, use all 4 long legs. For vertical viewing, adjust the 360-degree swivel and then re-tighten. The aluminum car seat rail or floor mount is ideal for those who prefer mounting somewhere other than the windshield or dash. Use a socket wrench to install the mount to the carâ€™s seat rail. Bend the 18â€ gooseneck for exact positioning of the tablet. Optional floor brackets are included for screwing the car dock directly into the floor of the vehicle. (Warning: Drilling into the vehicleâ€™s floor may damage the vehicle. Use caution and consult a mobile install professional to avoid drilling into any sensitive vehicle components.)
Impact Mounts Lcd Led Plasma Flat Tilt Tv Wall Mount Bracket 30 32 37 42 46 47 50 52 55 60 65 70 80. Solid Piece Wall Plate and Verticals. Lockable With A Padlock For Extra Security
Manufacturer: Impact Mounts
Brand: Impact Mounts
solid verticles = Stronger and no assembly required UNIVERSALLY FITS SCREEN SIZES 32" - 80" Screen size support used as a general guideline only. Actual fit is determined by the VESA measurements and weight capacity of this mount. See below and picture of back of TV Supports up to 165 lbs / 75 kgs VESA mounting patter max: 600 mm x 400 mm (23.62 x 15.75 inches max) Color: Black Includes all mounting hardware to install mount onto wall. VESA standard hardware to install TV to mount included will fit 98% of all TVs Tilts up and down 10 degrees Tilts up to allow easy access to connectors on the back of the TV Includes installed bubble level Five years warranty VESA mounting compliant Wall to TV distance: 3.5 inches
VIVO Dual Monitor Free-Standing Stand up Desk Mount Extra Tall 40" Pole Height Adjustable / Fits up to 27" Screens (STAND-V012F)
Complete your office space with a dual monitor free-standing desk mount (STAND-V012F) from VIVO. Clear up table work space on your desk and enjoy the benefits of standing while working with this extra tall monitor stand. The 40" center pole and adjustable computer screen height allow the user to adjust between sitting and standing positions. Tighten or loosen each joint to make your mount as fluid or stationary as desired. Special features include the ability for each individual VESA plate to be adjusted up and down by 1" so your monitors will be perfectly aligned (see pictures and video for more information). We also made mounting your monitors easy with detachable VESA plates that screw into your monitors and then slide back onto the frame of the stand. Constructed of high grade steel this rugged mount was built to resist scratches. Comes in a black matte finish. An optional bolt through grommet clamp is included with this stand. Compatibility & Measurements This is a standard VESA mount with 75 X 75 and 100 X 100 mounting holes Supports screens up to 22 lbs and 27" in size. STAND-V012F has an extra tall 40" center pole with easy height adjustment. Features: Tilt: -45 to +45 degree Swivel: 360 degree Rotate: 360 degree Height adjustable Integrated cable management system Monitors can be installed either in portrait or landscape shape Fully adjustable arm An optional bolt through grommet clamp is included with this stand.
Mount-It! Articulating TV Wall Mount for 32â€ â€“ 65â€ LCD/LED/Plasma Flat Screen TVs, Articulating Full Motion, 165 Lbs Capacity, Black (MI-2291)
Manufacturer: Transform Partners LLC
Mount-It! heavy-duty full motion articulating TV wall mount offers extreme versatility with a maximum extension of 18" from the wall. Its dual arm design is incredibly sturdy. This mount is a beast that will safely carry your TV. Dual TV safety screws are included to prevent accidental liftoff of the display. The use of heavy gauge metal minimizes sagging even fully extended. Compare pricing to any other articulating TV wall mount on Amazon.MI-2291 swivels from left to right for viewing from multiple angles. Ideal for corner installations. Powder coated steel construction provides a sleek, high-tech look.Mount-It! experience and guarantee. Mount-It! is the expert in television and computer monitor mounts. We apply our decade long experience in this field to offer the best features at value prices. All our products are guaranteed for satisfaction. Contact our friendly customer support team for any questions or issues.Â Â Â Features:Fits most of 32-60" Vizio TVsLarge extension capability is ideal for entertainment center installation.Tilt, Swivel and Extend/Collapse functionEasy tilting angle adjustmentHeavy duty steel construction and high-tech welding technologyBuilt-in bubble level makes leveling work easy and convenientIncludes all necessary mounting hardwareSpecifications: * TV Size Range: 32" - 60" (some even up to 75" depending on VESA bolting pattern and the TV weight)* Max TV weight: 165 lbs * Mounting Pattern: Universal and up to VESA 600 x 400. Fits VESA 600x400, 600x300, 600x200, 400X400, 400X300, 400X200, 300X300, 300X200, 200X200, 200X100, 200X150, 100X100, 75X75mm* Mounting Holes: up to 23.6" apart horizontally and up to 16" vertically * Wall plate dimensions: 25.5" wide by 8.
VIVO Single Monitor Stand up Mount Extra Tall 39" Pole Adjustable Stand / Fits One Screen up to 27" (STAND-V011)
Single monitor mount (STAND-V011) from VIVO! Clear up valuable work space on your desk with this extra tall monitor mount. The extra tall 39" pole allows the user to adjust from sitting and standing positions. Constructed of high grade steel, this rugged mount was built to resist scratches and supports screens 27" in size and weighing up to 22lbs. STAND-V011 offers a variety of features including easy height adjustment, 45 degree tilting angles for your screen, and multiple adjustment joints. Tighten or loosen each joint to make your mount as fluid or stationary as desired. We made mounting your monitors easy with detachable VESA plates that screw into your monitors and then slide back onto the frame of the stand. Monitors can be easily rotated for landscape or portrait positions. Included are both C-Clamp and Grommet mounting options to fit a variety of unique desk systems, as well as an integrated cable management system for clean organization of power and video cables. The clamp is able to fit desks up to 4.25" thick, and the grommet mount can fit up to 3.25". This is a standard VESA mount with 75x75 and 100x100 mm mounting. Compatibility & Measurements â—™ This is a standard VESA mount with 75 X 75 and 100 X 100 mounting holes â—™ Supports screens up to 22 lbs and 27" in size. â—™ STAND-V011 has an extra tall 39" center pole with easy height adjustment. Features: â—™ Tilt: -45 to +45 degree â—™ Swivel: 360 degree â—™ Rotate: 360 degree â—™ Height adjustable â—™ Integrated cable management system â—™ Monitors can be installed either in portrait or landscape shape â—™ Fully adjustable arm â—™ Ultra heavy duty "C" clamp (with 4.25" opening) and Grommet ( with 3.5" opening) mounting options
The VideoSecu ultra slim flat LCD mounts are incredibly easy to install, and feature a low-profile, sliding plate design that places the display very close to the wall for a clean look, while also providing a unique combination of simplicity and security. Its maximum loading is 66lbs. And it fits VESA 75/100 compliant. VideoSecu TV wall mount. Please Report to Amazon if received counterfeit mount without VideoSecu logo. Will It fit my LCD? * Firstly, please check the weight of your display, it should be less than 66 lbs. * Secondly, If your LCD Monitor or TV has 4 holes on the back of the screen that are either 75mm (3 inch) or 100mm (4 inch) apart from each other vertically and horizontally this bracket will fit. Notice: This mount fits most 15-24" TVs, some up to 26 27 inch TVs manufactured in recent 3 years